Search found 90 matches

Search found 90 matches Page 1 of 4
by LINDY Guy
Thu Oct 19, 2017 3:32 pm
Forum: USB & FireWire Products
Topic: Extending powered usb, _before the cable.
Replies: 2
Views: 11
Hi David, While we have seen some customers use the 8m Active cables with a short extension, it's something we do not recommend. These cable are designed to be connected directly to the source device (PC) as the chipset inside is tuned specifically to that 8m length. For your set-ups, we could only ...
by LINDY Guy
Wed Oct 18, 2017 9:11 am
Forum: General Chat
Topic: Switch for 2x Desktop PCs with 2 pairs of monitors
Replies: 1
Views: 15
Hi, It sounds as though you would need a Dual Head KVM Switch however this would not allow you to disable one monitor from PC1 and one monitor from PC2. It would always switch both displays at once to either PC1 or PC2. We also do not recommend using wireless mice or keyboards on any KVM product as ...
by LINDY Guy
Wed Oct 18, 2017 9:05 am
Forum: USB & FireWire Products
Topic: Firewire for Dell XPS 8900
Replies: 1
Views: 9
Providing your PC has a PCIe slot, and your device uses a 4 to 6 pin firewire cable, that should work fine.

Guy
by LINDY Guy
Tue Sep 19, 2017 9:23 am
Forum: KVM Switches & Extenders
Topic: 32811 switch stopped working correctly
Replies: 3
Views: 105
It may be worth checking your graphics drivers are up to date, however there are no drivers for the KVM itself.

I'm afraid if issues are happening with more than one PC, such as your Ubuntu PC and Windows PC, then it would point towards a fault developing on the KVM unfortunately.

Guy
by LINDY Guy
Mon Sep 18, 2017 11:28 am
Forum: KVM Switches & Extenders
Topic: 32811 switch stopped working correctly
Replies: 3
Views: 105
Hi Schoon, Unfortunately if the switch has stopped functioning correctly after a period of time, we could only recommend that you return it to the place of purchase for testing and replacement. There isn't really any configuration on these units so if it has stopped handshaking then it may be a faul...
by LINDY Guy
Mon Aug 21, 2017 9:49 am
Forum: Audio, Video & Home Cinema
Topic: Lindy SPDIF DAC Pro - only getting one channel
Replies: 1
Views: 128
Hi Terrier, Normally if the problem happens with 2 different source devices then it would point to the DAC being at fault, however it's very unlikely that you would get 2 units with the same issue. It is possible there is some form of incompatibility occurring however to confirm that you would need ...
by LINDY Guy
Tue Aug 15, 2017 9:08 am
Forum: USB & FireWire Products
Topic: Part No. 41587 0.5m CROMO USB 2.0 Type A to Mini-B Cable
Replies: 1
Views: 130
Hi matrix315,

The cable is a standard USB 2.0 A to Mini-B, so providing your Sat Nav has a mini-B connection it should be compatible.

Guy
by LINDY Guy
Thu Jul 27, 2017 9:47 am
Forum: Power Leads & Adapters
Topic: IP Power Switch Classic 8 - Email Notification Problem!
Replies: 10
Views: 1045
Hi Michael,

I'm afraid the email address and hostname fields do have a 15 character limitation on them, and unfortunately we do not have any newer firmware that would increase this.

Currently the only solution would be to use a shorter email address if possible.

Guy
by LINDY Guy
Fri Jun 16, 2017 9:11 am
Forum: Add-on Cards
Topic: 51275 8 port board
Replies: 9
Views: 706
Thanks for the feedback, good to hear!

Guy
by LINDY Guy
Tue May 02, 2017 11:16 am
Forum: Audio, Video & Home Cinema
Topic: Help with Scart to HDMI Scaler.
Replies: 4
Views: 312
Hi, It's a bit unusual for it to display like that, it sounds as though there is some sort of interference occurring or it is possible there is a problem with the unit. I think it's probably best that we get the converter back to have a look at, if it was purchased directly through Lindy UK, the eas...
by LINDY Guy
Tue May 02, 2017 9:05 am
Forum: Audio, Video & Home Cinema
Topic: Help with Scart to HDMI Scaler.
Replies: 4
Views: 312
Hi FFrostbite2k9, Have you tried different SCART and HDMI cables on the converter to see if that stops the flickering? Would it be possible for you to try it in your friends set-up? That would determine whether there is a fault on the unit, or if there is some form of incompatibility or other issue ...
by LINDY Guy
Tue Apr 25, 2017 10:07 am
Forum: Audio, Video & Home Cinema
Topic: Bi-directional HDMI switch
Replies: 2
Views: 194
Hi Stuart, We normally suggest using identical displays with this switch, as non identical displays will cause some audio and video issues. The switch will only handshake with one display so that may be the issue you are experiencing. You could try swapping the ports the TV and Monitor are connected...
by LINDY Guy
Tue Apr 18, 2017 9:16 am
Forum: Add-on Cards
Topic: 51275 8 port board
Replies: 9
Views: 706
Hi TekLord,

Glad to hear you have figured the pinout attached. We have just had a reply from our factory, pinout is attached below.
51275 Pinout.PNG
51275 Pinout.PNG (173.43 KiB) Viewed 681 times
Guy
by LINDY Guy
Fri Apr 07, 2017 9:03 am
Forum: Add-on Cards
Topic: 51275 8 port board
Replies: 9
Views: 706
Unfortunately we don't currently have that information available, however I have requested it from our factory and will let you know when I have an answer.

Guy
by LINDY Guy
Thu Apr 06, 2017 9:29 am
Forum: Add-on Cards
Topic: 51275 8 port board
Replies: 9
Views: 706
Hi TekLord,

Is it just the pinout for the 62-pin cable that you require?

Guy
by LINDY Guy
Wed Apr 05, 2017 9:29 am
Forum: KVM Switches & Extenders
Topic: 39636 KVM Over IP Access Module Appears Dead?
Replies: 1
Views: 158
Hi bcg, If you run the supplied software as shown on page 18 of the manual below, does it list a MAC Address and IP Address? https://www.lindy.co.uk/downloads/39636_632v0.pdf If this gives you an IP address, when entered into a browser does it take you to the IP Module login page? Please note the co...
by LINDY Guy
Thu Mar 30, 2017 9:17 am
Forum: Audio, Video & Home Cinema
Topic: HDMI to VGA - loss of audio
Replies: 1
Views: 173
Hi IanGH, It sounds as though your laptop may have set the HDMI to VGA adapter as the default audio output device. If you go into your sound settings > playback devices, you should be able to set your Laptop speakers as default. The 38191 does not carry audio, if you want to send the audio out to yo...
by LINDY Guy
Fri Mar 10, 2017 9:29 am
Forum: General Chat
Topic: 43176 driver
Replies: 1
Views: 180
Hi dcasher,

This uses an AX88179 chipset and the driver can be downloaded here:

http://www.asix.com.tw/download.php?sub ... ItemID=131

Guy
by LINDY Guy
Tue Mar 07, 2017 11:10 am
Forum: General Chat
Topic: Need a device
Replies: 3
Views: 713
Hi Johnniewalk,

If you just need a single input to multiple outputs, you can use a splitter:

https://www.lindy.co.uk/audio-video-c2/ ... to-dvi-t76

Guy
by LINDY Guy
Wed Mar 01, 2017 9:14 am
Forum: General LINDY Products & Cables
Topic: Lindy NC-40 Sound Issue
Replies: 1
Views: 200
Hi DreamS, Sorry to hear about your headphones. We wouldn't normally expect a drop from desk height to cause the NC-40's to break, it sounds as though the drop may have caused something inside the headphones to either fail or become loose, in which case we could get those back for testing and replac...
by LINDY Guy
Fri Feb 03, 2017 9:03 am
Forum: General LINDY Products & Cables
Topic: 8-pin mini Din wiring info
Replies: 2
Views: 308
Hi James, Please find the pinout and colours attached below. It is worth noting that you will need to pin out one of the colours to a pin in the connector in order to use this effectively as this cable is crossed over. As you are cutting the cable, depending on whether you use Connector A or Connect...
by LINDY Guy
Tue Jan 31, 2017 4:49 pm
Forum: Extending & Distribution
Topic: HDMI Over IP - PN: 38126
Replies: 3
Views: 264
Hi Steve,

Not as far as we are aware. The only way to view signal being transmitted over the network is to connect up a matching receive within the same LAN.

Guy
by LINDY Guy
Mon Jan 30, 2017 9:17 am
Forum: Extending & Distribution
Topic: HDMI Over IP - PN: 38126
Replies: 3
Views: 264
Hi Steve, The extender will convert the video signal into a MJPEG format to be sent over the network as a multicast signal. If you connect the receiver to your network and display before the transmitter, you should see an on screen display which will list the receivers IP address, and when you then ...
by LINDY Guy
Thu Jan 26, 2017 3:26 pm
Forum: USB & FireWire Products
Topic: 43188 has zero MAC address after reboot
Replies: 1
Views: 373
Hi Chris, I've checked some of the adapters today and cannot seem to replicate your issue, after multiple reboots it always has an MAC address listed (when you look under command prompt - ipconfig /all). Could you send us a screenshot of it without a MAC address please? The address is built into the...
by LINDY Guy
Thu Jan 12, 2017 12:50 pm
Forum: Add-on Cards
Topic: LINDY No. 51237 - won't install drivers
Replies: 8
Views: 552
Hi, We have tested this card on Windows 7 64 Bit previously so I don't think that would be the issue. Do you have another computer you could test it in? If it works in another computer then it may be that the card is incompatible with your win7 PC I'm afraid, in that case I would suggest returning i...
Search found 90 matches Page 1 of 4