Search found 7 matches

Search found 7 matches Page 1 of 1
by redbuslondon
Fri Jul 31, 2015 11:35 am
Forum: Extending & Distribution
Topic: HDMI over Ethernet extender C6 38119
Replies: 10
Views: 3542
Yes, sounds like it. Thanks for letting me know and sorry to bother you. But this should be a clear warning to others!
by redbuslondon
Fri Jul 31, 2015 11:25 am
Forum: Extending & Distribution
Topic: HDMI over Ethernet extender C6 38119
Replies: 10
Views: 3542
I've send the units in to the supplier and haven't heard anything back from them yet. Anyway, I purchased another pair of HDMI-over-Ethernet extenders for only £40 - and have got the same problem! They are supposed to work up to 60m ('and beyond with a good cable', in fact one customer is using a wh...
by redbuslondon
Mon Jul 27, 2015 12:34 pm
Forum: Extending & Distribution
Topic: HDMI over Ethernet extender C6 38119
Replies: 10
Views: 3542
I did two final tests today: I checked the installed cable (which must be around 60mtr, given what's left of the 100m reel) with a laptop and connected the other end to our internet router and it worked instantly. Then I rolled the remaining 40mtr (or so) of the cable from the reel, laid it flat on ...
by redbuslondon
Fri Jul 24, 2015 12:18 pm
Forum: Extending & Distribution
Topic: HDMI over Ethernet extender C6 38119
Replies: 10
Views: 3542
Discovering that the contacts on the new plugs are pushed in quite deeply and again fearing that the contact springs in the extenders can't reach them I've peeled all the plastic grooves away between the contacts of the plugs, tried with the cable tester, continuity is present and when twisting and ...
by redbuslondon
Fri Jul 24, 2015 11:24 am
Forum: Extending & Distribution
Topic: HDMI over Ethernet extender C6 38119
Replies: 10
Views: 3542
I've now again replaced the end plugs and bought a different type because I discovered that the grooves in the firstly used plugs were getting narrower near the contacts, narrower than in the short patch cable that I'd tested before with which I could get the link to work, so I reckoned the contact ...
by redbuslondon
Thu Jul 23, 2015 5:29 pm
Forum: Extending & Distribution
Topic: HDMI over Ethernet extender C6 38119
Replies: 10
Views: 3542
Yes, we might have talked. Buying a pre-made patch lead with a length of 40m is not that straightforward and apart from that it took me two days to get the cable in place (over two levels, through and along walls, over suspended ceilings with loads of French language needed!) The cable I used came r...
by redbuslondon
Thu Jul 23, 2015 3:26 pm
Forum: Extending & Distribution
Topic: HDMI over Ethernet extender C6 38119
Replies: 10
Views: 3542
After I had installed an about 40m long cable in the ceilings and walls of a restaurant I connected the transmitter and receiver units today, sadly the LINK LED doesn't come on. Connecting the two with a short patch lead works fine and instantly. I've crimped the long cable myself and checked it wit...
Search found 7 matches Page 1 of 1