Search found 38 matches

  • 1
  • 2
Search found 38 matches Page 1 of 2
by LINDY Adam
Wed Jun 05, 2019 11:52 am
Forum: Audio, Video & Home Cinema
Topic: flickering through vga switch
Replies: 2
Views: 40
Hi Colin, This sounds like it could be a power issue. Normally with laptops they have very low powered on the output ports. I would recommend trying an Active Splitter rather than the passive one you have. This would be something like our part 32569. If you purchased the 41214 within 30 days and dir...
by LINDY Adam
Mon Jun 03, 2019 3:26 pm
Forum: Extending & Distribution
Topic: HDMI Cat.6 Extender (38144) Help?
Replies: 4
Views: 102
Hi Leestringer, The EQ is an equalizer that you change depending on the length you are going. You are correct it is all about power. The reason you might need the higher end 40-50 could be a few things. The termination of the cat.6 cables, the copper that is been used, Shielding or the amount of con...
by LINDY Adam
Mon Jun 03, 2019 3:02 pm
Forum: Extending & Distribution
Topic: HDMI Cat.6 Extender (38144) Help?
Replies: 4
Views: 102
Hi Leestringer, In the set-up you have I see no reason why this wouldn't work. If you have everything set-up in the second office and use the Local output HDMI on the transmitter do you get anything? Have you also tried adjusting the dip switches on the receiver side? You can see in the manual there...
by LINDY Adam
Mon May 20, 2019 9:25 am
Forum: General LINDY Products & Cables
Topic: Cromo NCX-100 has stopped working
Replies: 1
Views: 30
Hi Pmonjo,

Unfortunately it looks as though the headphones have failed. As they where purchased over two years ago I'm afraid there isn't anything we can do.

Regards Adam
by LINDY Adam
Thu May 02, 2019 2:32 pm
Forum: Audio, Video & Home Cinema
Topic: Screen flickering with HDMI extender
Replies: 12
Views: 168
Hi Corné,

This isn't an issue I have come across before. Are you able to use a Different TV and see if the issue is replicated?

Regards Adam
by LINDY Adam
Thu May 02, 2019 9:08 am
Forum: Audio, Video & Home Cinema
Topic: Screen flickering with HDMI extender
Replies: 12
Views: 168
Hi Corné,

When you say you need to manually confirm the HDMI signal does that mean every time you switch inputs you have to use the TV remote and go back to the HDMI port this set-up is set too?

Regards Adam
by LINDY Adam
Fri Apr 26, 2019 12:14 pm
Forum: Audio, Video & Home Cinema
Topic: Optical splitter
Replies: 1
Views: 66
Hi Tomcat39,

We do have a two port optical splitter: https://www.lindy.co.uk/audio-video-c2/splitters-c159/2-port-toslink-digital-optical-audio-splitter-p2918

Regards Adam
by LINDY Adam
Tue Apr 23, 2019 9:11 am
Forum: Audio, Video & Home Cinema
Topic: Screen flickering with HDMI extender
Replies: 12
Views: 168
Hi Corné

I would recommend trying the Extender and the matrix separately from source device to TV and see if they work without issue.

Regards Adam
by LINDY Adam
Wed Apr 17, 2019 4:02 pm
Forum: Audio, Video & Home Cinema
Topic: Screen flickering with HDMI extender
Replies: 12
Views: 168
Hi Corné,

The matrix should have DIP switches on the side of the unit. These are for EDID control. If the unit doesn't have these it maybe a different part number.

Regards Adam
by LINDY Adam
Wed Apr 17, 2019 3:33 pm
Forum: Audio, Video & Home Cinema
Topic: Screen flickering with HDMI extender
Replies: 12
Views: 168
Hi,

Are your panels and projectors 1920x1080? If so have you tried changing the EDID DIP switches on the HDMI matrix to a 1080p resolution? Have you tried changing the ports used for the TV's with the Projector, does the issue follower the TV's or the output port on the matrix?

Regards Adam
by LINDY Adam
Wed Apr 17, 2019 12:12 pm
Forum: Audio, Video & Home Cinema
Topic: Screen flickering with HDMI extender
Replies: 12
Views: 168
Hi CPR3417,

Please can you let me know how you have these units set-up. Cable lengths, Switches, faceplates. Are you using 38126 on all the outputs of the matrix?

Regards Adam
by LINDY Adam
Mon Apr 15, 2019 4:35 pm
Forum: Audio, Video & Home Cinema
Topic: problems with RS-232 commands
Replies: 1
Views: 46
Hi vudiemphuongchi

Are you cables pass-through (pin to pin) or crossover?

Regards Adam
by LINDY Adam
Thu Mar 07, 2019 9:38 am
Forum: Networking Products
Topic: 4 Port USB IP Server Problems
Replies: 1
Views: 354
Dear Bradley Barraza,

Please can you give me the part number and what is the problem you are having with our unit?

Regards Adam
by LINDY Adam
Mon Mar 04, 2019 11:21 am
Forum: Extending & Distribution
Topic: Switch 38244 and Repeater 38211
Replies: 8
Views: 382
Hi Martin,

Yes, that was the set-up I tested.

Regards Adam
by LINDY Adam
Mon Mar 04, 2019 11:10 am
Forum: Extending & Distribution
Topic: Switch 38244 and Repeater 38211
Replies: 8
Views: 382
Hi Martin,

I have tried the set-up and I'm afraid the repeater didn't work in our testing. Normally repeaters are used with long lengths, however I did try the set-up with our 5m Cromo HDMI cable which worked fine.

Regards Adam
by LINDY Adam
Mon Mar 04, 2019 9:21 am
Forum: Extending & Distribution
Topic: Switch 38244 and Repeater 38211
Replies: 8
Views: 382
Hi Martin,

While we can try the following parts together and confirm compatibility. The repeater is designed to be used with our HDMI Gold Line cables. Alternatively You could try using a High Quality HDMI cable like our part 37874.

Regards Adam
by LINDY Adam
Fri Mar 01, 2019 4:49 pm
Forum: Extending & Distribution
Topic: Switch 38244 and Repeater 38211
Replies: 8
Views: 382
Hi Martico,

What is the total distance you need to go? A passive cable may work at short distances, however we will need to test the parts to confirm they are compatible.

Regards Adam
by LINDY Adam
Mon Feb 11, 2019 9:31 am
Forum: Audio, Video & Home Cinema
Topic: 2 Port HDMI Splitter 38240 with xbox (screen goes black)
Replies: 5
Views: 197
Hi Mehdi, I have had a customer using the splitter with a PS4. Using wireless/blue-tooth devices should have any affect on the these units and is hard to say what the cause of the dropping out could be as its something we haven't seen before. If you have tried two of these units and both are acting ...
by LINDY Adam
Thu Jan 31, 2019 9:20 am
Forum: Audio, Video & Home Cinema
Topic: Home Entertainment Solution Needed!
Replies: 1
Views: 70
Hi Mushkan,

I'm afraid we don't have anything else we can offer. The closest product we have would be the brush plate unfortunately.

Regards
Adam
by LINDY Adam
Wed Jan 16, 2019 10:52 am
Forum: Audio, Video & Home Cinema
Topic: 2 Port HDMI Splitter 38240 with xbox (screen goes black)
Replies: 5
Views: 197
Hi Mehdi,

As you are using 4K resolutions we would recommend cables that are rated at high speed.

Are you able to try the EDID dip switch 0000? This should copy the EDID from output 1 rather than use a preset EDID on the unit.

Regards Adam
by LINDY Adam
Wed Jan 16, 2019 9:40 am
Forum: Audio, Video & Home Cinema
Topic: 2 Port HDMI Splitter 38240 with xbox (screen goes black)
Replies: 5
Views: 197
Hi Mehdi,

Please can you let me know the cable lengths you are using on the input and output of the splitters?

Regards Adam
by LINDY Adam
Mon Aug 20, 2018 10:54 am
Forum: KVM Switches & Extenders
Topic: 4 Port KVM Switch PRO USB, DisplayPort & Audio (2015 model)
Replies: 4
Views: 477
Hi Steviewest,

I'm afraid that it does sound like the unit is faulty. Unfortunately the unit is out of warranty and wouldn't be able to replace it.

Apologies I wasn't able to help fix the issues on this occasion.

Regards Adam
by LINDY Adam
Thu Aug 16, 2018 2:00 pm
Forum: KVM Switches & Extenders
Topic: 4 Port KVM Switch PRO USB, DisplayPort & Audio (2015 model)
Replies: 4
Views: 477
HI Steviewest,

Have you changed anything in your set-up? Length of cable?

Would it be possible to power everything down. Once everything is powered down can you turn everything back on starting with the monitor, KVM then the Mac mini servers?

Regards Adam
by LINDY Adam
Wed Aug 01, 2018 9:09 am
Forum: General Chat
Topic: lindy control app crashing on my iphone X
Replies: 4
Views: 709
Hi PedroG

Please can you let me know the products part number you have?

Adam
by LINDY Adam
Mon Jun 04, 2018 9:04 am
Forum: Audio, Video & Home Cinema
Topic: HDMI & IR Cat 6 Extender
Replies: 1
Views: 458
Hi Ryannicholls,

Please can you let me know the resolution you are using?
You are able to change the dip switches while the unit is powered on,

Regards
Adam
  • 1
  • 2
Search found 38 matches Page 1 of 2