Search found 43 matches

  • 1
  • 2
Search found 43 matches Page 1 of 2

by LINDY Gary
Mon Apr 11, 2011 3:37 pm
Forum: USB & FireWire Products
Topic: USB XLR Microphone Cable Part 6105
Replies: 3
Views: 2784
Hi Indigo, Are you trying to capture voice or some type of instrument or music playback ? Instructions things you'll need: Computer with at least one USB jack USB audio interface Microphone with XLR connection XLR cable USB cable Audio recording software Instructions 1 Install audio recording softwa...

by LINDY Gary
Fri Apr 08, 2011 9:47 am
Forum: USB & FireWire Products
Topic: USB XLR Microphone Cable Part 6105
Replies: 3
Views: 2784
Hi Indi,

Which software application are you using with this device ?

Have you looked at the tips and guides for this product, see the links below.

Best Regards

by LINDY Gary
Mon Apr 04, 2011 9:43 am
Forum: KVM Switches & Extenders
Topic: KM Switch with vertical monitors
Replies: 5
Views: 4192
Hi Dave,

Yes this will work fine, providing the monitor is detected through DDC which the switch supports and your video controller graphics driver is installed supporting this, there shouldn't be an issue.

Best Regards

by LINDY Gary
Thu Mar 24, 2011 9:43 am
Forum: USB & FireWire Products
Topic: Power supply question - Cat5 Firewire extender
Replies: 3
Views: 2778
Hi Andy,

It's centre positive, see the unit that we sell :

http://www.lindy.co.uk/shop/showProduct ... rce=search

I have already spoken to someone else with regards to this and provided the same information.

Best Regards

by LINDY Gary
Thu Mar 24, 2011 9:02 am
Forum: USB & FireWire Products
Topic: Power supply question - Cat5 Firewire extender
Replies: 3
Views: 2778
Hi Andy,

If you are referring to LINDY part no. 32917, you should have a Multi Country electronic switching 9vDC PSU. The unit will operate using DC and not AC.

Best Regards

by LINDY Gary
Fri Mar 04, 2011 9:23 am
Forum: Networking Products
Topic: plug cat 6
Replies: 8
Views: 7066
Hi There, I don't think so, it still falls under the Cat5e or Category 5 connection specification as far as I can see on the internet. Cable manufacturers will follow the electrical specifications for Cat6 cables that have been specified by ANSI/TIA, but things like the insulation thickness and cons...

by LINDY Gary
Thu Mar 03, 2011 1:42 pm
Forum: Networking Products
Topic: plug cat 6
Replies: 8
Views: 7066
Hi There,

The specification comes before the certification. Please see some details in the link.

http://media.extron.com/download/files/ ... 020402.pdf

Best Regards

by LINDY Gary
Thu Mar 03, 2011 9:07 am
Forum: Networking Products
Topic: plug cat 6
Replies: 8
Views: 7066
Hi There, OK Yes, the resistance between the Ca5e and Cat6 conductors must be different because of the difference between bandwidth support, hence the thicker copper conductor. Here is some more information: Home > Do it Yourself Resources > DIY Resources > Cables & Cabling Standards > Cat5e and Cat...

by LINDY Gary
Wed Mar 02, 2011 10:36 am
Forum: Networking Products
Topic: plug cat 6
Replies: 8
Views: 7066
Hi There, This is a good question. The staggered teeth within the connector are designed this way because the Cat6 gauge is bigger than Cat5e. This is also because of the insulation type used. I have personally made Cat6 cables here and had to use the right connector because they simply wouldn't fit...

by LINDY Gary
Fri Feb 25, 2011 10:37 am
Forum: Add-on Cards
Topic: eSATA-150 Cardbus Adapter (51345)
Replies: 2
Views: 3986
Hi Barry, Sorry for the delay in not getting back to you. We have been looking into this and the unit that you have should provide port multiplier function automatically, there is nothing to enable. I have double checked the chipset support and I don't think that this unit supports port multiplier b...

by LINDY Gary
Thu Feb 24, 2011 9:24 am
Forum: General LINDY Products & Cables
Topic: As of yesterday, can't connect to Classic 8 w/ firefox
Replies: 7
Views: 5829
Hi Dave,

Unfortunately we have no solution to resolve this at the moment, the only thing that we can suggest is that you try an alternative browser to see if this eliminates the issue.

Best Regards

by LINDY Gary
Mon Feb 21, 2011 4:38 pm
Forum: Extending & Distribution
Topic: KVM over Cat5
Replies: 1
Views: 2244
Dear Sir, The 3in1 Cable is to connect the computer to the Transmitter and Receiver. Both units can connect to a PC, one at the local and one at the remote end. Each unit will need the power supply included connected. You can use a PS/2 keyboard and mouse with this extender. For the extended Cat5 ca...

by LINDY Gary
Fri Feb 18, 2011 2:03 pm
Forum: Networking Products
Topic: HELP! DUAL HDD NAS "REBUILDING RAID"
Replies: 3
Views: 4131
Hi There, Yes I think it can be forensically recovered but a specialist company, it may be an idea to make some clones or images of the disks if possible first. I know that this is an issue even for proper RAID volumes because the container of the data varies between formats and systems/volumes. If ...

by LINDY Gary
Fri Feb 18, 2011 11:35 am
Forum: Networking Products
Topic: HELP! DUAL HDD NAS "REBUILDING RAID"
Replies: 3
Views: 4131
Hi Sir, It's quite unfortunate to hear that this has happened. To be perfectly honest with you I don't think that your data will be retrievable, but this is something that I am going to check with our factory for you. If the volumes within the unit were not set up as a soft RAID then an Linux distri...

by LINDY Gary
Mon Feb 14, 2011 9:06 am
Forum: Add-on Cards
Topic: ExpressCard/34 won't install on MacBook Pro
Replies: 9
Views: 8104
Hi Jonathan,

Please can you complete a returns form from our website then and we can get this card back for testing.

http://www.lindy.co.uk/shop/showPage.do?page=returnsEU

Best Regards

by LINDY Gary
Wed Feb 09, 2011 9:17 am
Forum: KVM Switches & Extenders
Topic: dvi kvm switch not working
Replies: 3
Views: 2647
Hi There,

I think the best way forward might be for us to have a look at the switch here.

Please can you complete a returns form using the below link.

http://www.lindy.co.uk/shop/showPage.do?page=returnsEU

Best Regards

by LINDY Gary
Mon Feb 07, 2011 11:11 am
Forum: General Chat
Topic: guitar usb (6104) into Cubase SX
Replies: 5
Views: 5441
Hi Dave, My colleague who uses Cubase quite often himself has done some further testing with the CM Audio device, and we have found that this does work under the Cubase application. It seems that you may have 'switch' the device from the Device Setup or close Cubase and open it again. See the screen...

by LINDY Gary
Mon Feb 07, 2011 9:21 am
Forum: KVM Switches & Extenders
Topic: dvi kvm switch not working
Replies: 3
Views: 2647
Hi Michael,

Please can you tell me if this screen comes on when the computer is booting ?

Have you tried a low resolution mode and checked the connections in and out of the switch ?



Best Regards

by LINDY Gary
Tue Jan 25, 2011 12:46 pm
Forum: Audio, Video & Home Cinema
Topic: HDMI Sound problem
Replies: 7
Views: 4701
Please can you give me the model of your TV and also your HDMI source or output and I will discuss this with our factory to see if they have any ideas. Please can you give me an idea of HDMI resolution and also the type of cable that is being used with this. To date we have not come accross such iss...

by LINDY Gary
Tue Jan 25, 2011 12:24 pm
Forum: Audio, Video & Home Cinema
Topic: HDMI Sound problem
Replies: 7
Views: 4701
Hi Again,

We can test the item here if you wish to see if the unit itself causes a problem.

Please complete a returns form from the link below.

http://www.lindy.co.uk/shop/showPage.do?page=returnsEU

Best Regards

by LINDY Gary
Tue Jan 25, 2011 11:52 am
Forum: Audio, Video & Home Cinema
Topic: HDMI Sound problem
Replies: 7
Views: 4701
Hi There,

How frequent are the drop outs in audio, when they come back are they in the same sync as before ? Does this occur in the first hour if the unit is turned off for a few minutes and then turned back on ?

How long are your HDMI cables ?

Best Regards

by LINDY Gary
Mon Jan 24, 2011 11:52 am
Forum: Add-on Cards
Topic: ExpressCard/34 won't install on MacBook Pro
Replies: 9
Views: 8104
Hi Jonathan,

Please try the driver file that is attached. I hope this helps.

Best Regards

by LINDY Gary
Mon Jan 24, 2011 10:30 am
Forum: Add-on Cards
Topic: ExpressCard/34 won't install on MacBook Pro
Replies: 9
Views: 8104
Hi Jonathan,

I will check with our factory with regards to this and then get back to you.

Best Regards

by LINDY Gary
Mon Jan 24, 2011 9:16 am
Forum: Add-on Cards
Topic: ExpressCard/34 won't install on MacBook Pro
Replies: 9
Views: 8104
Hi Jonathan,

Is this the item that you are using ?

http://www.lindy.co.uk/shop/showProduct ... rce=search

Best Regards

by LINDY Gary
Fri Jan 21, 2011 9:39 am
Forum: Networking Products
Topic: Dual HDD NAS - data loss
Replies: 2
Views: 3896
Hi There,

I will look into this with our factory and get back to you. We have in the past recommended using a Linux operating system because the discs are in 'ext3' file format, but with the RAID format these are not normally recognised.

Let me see what I can find.

Best Regards
  • 1
  • 2
Search found 43 matches Page 1 of 2