4 Port USB IP Server Problems

Ethernet - Switches - Hubs - Enclosures - Patch Panels - Cabinets
2 posts Page 1 of 1
BradleyBarraza
New member
Posts: 1
Joined: Thu Mar 07, 2019 6:27 am
by BradleyBarraza » Thu Mar 07, 2019 7:06 am
If the device is known to be working properly, but does not turn on when connected to the USB port, check if the device does not have its own power adapter, and if it does, then it is properly connected.
Connecting too many USB devices to a USB hub that does not have its own power source can overload the USB port to which the hub is connected. Disconnect some devices from the USB hub or purchase a hub with its own power adapter.
If all attempts to connect devices to the USB ports of the computer end with a power error message, then the USB subsystem may be faulty. In this case, it is necessary to perform its diagnostics at an authorized write my essay service center. http://en.wikipedia.org
LINDY Adam
LINDY Staff
Posts: 26
Joined: Thu May 18, 2017 2:30 pm
by LINDY Adam » Thu Mar 07, 2019 9:38 am
Dear Bradley Barraza,

Please can you give me the part number and what is the problem you are having with our unit?

Regards Adam
2 posts Page 1 of 1