4 Port USB 2.0 over IP Server

Ethernet - Switches - Hubs - Enclosures - Patch Panels - Cabinets
7 posts Page 1 of 1
tazback
New member
Posts: 4
Joined: Tue Aug 10, 2010 11:13 am
by tazback » Tue Aug 10, 2010 11:17 am
Hello can you tell me what the maximum distance of this device is?

I need one to work over 40 metres.

Thanks in advance

 

LINDY Shippers
LINDY Staff
Posts: 655
Joined: Wed Mar 17, 2010 1:32 pm
 
by LINDY Shippers » Tue Aug 10, 2010 11:34 am
Hello,

Since it is IP based (TCP/IP) then you can have 100m from your switch to the device.

Best Regards

 

tazback
New member
Posts: 4
Joined: Tue Aug 10, 2010 11:13 am
by tazback » Tue Aug 10, 2010 12:53 pm
Thanks for the speedy reply.

Do you know if this will work for Touch screen monitors?

 

LINDY Shippers
LINDY Staff
Posts: 655
Joined: Wed Mar 17, 2010 1:32 pm
 
by LINDY Shippers » Tue Aug 10, 2010 12:57 pm
We only support this with Mass storage, printers and scanners.

However that said we do know some device work as well, unfortunately I do not know if a touch screen would work, does it install as a standard HID device?

 

tazback
New member
Posts: 4
Joined: Tue Aug 10, 2010 11:13 am
by tazback » Tue Aug 10, 2010 1:11 pm
Yes it does

 

LINDY Shippers
LINDY Staff
Posts: 655
Joined: Wed Mar 17, 2010 1:32 pm
 
by LINDY Shippers » Tue Aug 10, 2010 1:33 pm
Standard USB HID devices normally work fine, I couldn't say 100% though.

Best Regards

 

tazback
New member
Posts: 4
Joined: Tue Aug 10, 2010 11:13 am
by tazback » Tue Aug 10, 2010 1:42 pm
Thanks again for your help
7 posts Page 1 of 1