4 Port IP Serial problems

Ethernet - Switches - Hubs - Enclosures - Patch Panels - Cabinets
3 posts Page 1 of 1
srodrigues
New member
Posts: 3
Joined: Thu Dec 03, 2015 12:21 pm
by srodrigues » Thu Dec 03, 2015 12:34 pm
Hello,

Getting problems, with Lindy 4 Port IP Serial. It does disconnect ports running in Virtual COM mode, or going to password protection, without have it set.
The current configuration running is :
with fixed IP address
RS-232 Serial port mode
Server connection mode
Remote IP address assigned
and remaining default values

By Manual documentation reading, be aware that it have a HeartBeat feature that should keep alive Virtual COM. It that a setting to be enabled? And why it goes in password protection?
LINDY Guy
LINDY Staff
Posts: 82
Joined: Thu Oct 30, 2014 1:10 pm
by LINDY Guy » Thu Dec 03, 2015 2:53 pm
Hello,

Has this recently started, or has it always been like this since it was installed?

We will try to set one up at our end to try and replicate your issue.

Guy
srodrigues
New member
Posts: 3
Joined: Thu Dec 03, 2015 12:21 pm
by srodrigues » Thu Dec 03, 2015 3:17 pm
Hello,

The disconnect port is not unusual, but had increase lately. Going in password protected, is recent experience. Wait your updtae on this.

Thanks,

Sergio
3 posts Page 1 of 1