USB 2.0 over IP Server

Ethernet - Switches - Hubs - Enclosures - Patch Panels - Cabinets
14 posts Page 1 of 1
russellm
New member
Posts: 4
Joined: Tue Jun 29, 2010 11:41 am
by russellm » Tue Jun 29, 2010 3:24 pm
The Network Printer Wizard finds the correct printer and installs the print driver all right, but when I try to print a test page I get a printing error. This happens on two Vista Business SP2 machines and a Windows Server 2003 R2 SP2.

 

LINDY Shippers
LINDY Staff
Posts: 655
Joined: Wed Mar 17, 2010 1:32 pm
 
by LINDY Shippers » Tue Jun 29, 2010 3:27 pm
Hi,

I am taking a guess you have the single port?

What is the error message you receive?

Have you tried the latest software from our website?

Best Regards

 

russellm
New member
Posts: 4
Joined: Tue Jun 29, 2010 11:41 am
by russellm » Tue Jun 29, 2010 3:44 pm
Part No. 42890 and another sticker 18100400344 Made in Taiwan.

Just a Error - Printing in the print queue window and a popup in the printer properties.

Where do I find the latest software for this server?

 

LINDY Shippers
LINDY Staff
Posts: 655
Joined: Wed Mar 17, 2010 1:32 pm
 
by LINDY Shippers » Tue Jun 29, 2010 4:06 pm

 

russellm
New member
Posts: 4
Joined: Tue Jun 29, 2010 11:41 am
by russellm » Tue Jun 29, 2010 5:16 pm
Downloaded All OS - Inc Windows 2008 42890.zip
Installed Network Wizard again, required restart.
Ran Wizard, found printer HP HP LaserJet M1319f MFP-0016e6
driver installed, required another restart.
Tried test page - still getting error printing.

 

LINDY Shippers
LINDY Staff
Posts: 655
Joined: Wed Mar 17, 2010 1:32 pm
 
by LINDY Shippers » Wed Jun 30, 2010 9:06 am
Multi Function Printers can have problems over print servers and also USB IP servers. I would guess that it is a compatibility problem between the two.

Does it work fine using the Rally software and a pen drive?

Best Regards

 

russellm
New member
Posts: 4
Joined: Tue Jun 29, 2010 11:41 am
by russellm » Wed Jun 30, 2010 10:19 am
Yes, the USB server works great with a SanDisk Cruzer 2.0 Flash Drive. I can write a file to the flash drive with one PC and read it with another.

I finally got the printer to upgrade to the latest firmware, once I realized that the reason "M1319_FW_Upgrade_1206_20090901.exe" could not find the printer was that I was running it remotely. When run locally it seemed to go ok and the new version of firmware shows up on the Self Test / Configuration page.

After reloading print driver with Network Wizard, still got "Error - Printing".

FIXED!!!

Using the Rally USB server software running on a Vista work station in the server room I am able to connect to the HP M1319f MFP which then appears on the WS' printer list and share it out across our LAN from there.

 

xrabadan
New member
Posts: 1
Joined: Mon Oct 28, 2013 10:43 am
by xrabadan » Tue Oct 29, 2013 7:03 am
Hello,
When a USB connector or other device and connect on the software pulse always an error. I checked everything, always appears this error on any device.


Thank you for your help.

The information listed in the error is:

Operation did not succeed!
Please check the network cable and power supply of your device.
You can also:
1. Power off and then power on your device
2. Restart USB Server
3. Re-connect the USB device and continue with your operation.

 

piotr.nawrocki
New member
Posts: 3
Joined: Fri Apr 11, 2014 12:44 pm
by piotr.nawrocki » Fri Apr 11, 2014 12:49 pm
Does anyone know if there is a possibility (and if there is a way - how to do that) to run Rally USB Server software as a service so that it will automatically reconnect with the pendrive after server (VM) restart ?

 

LINDY Shippers
LINDY Staff
Posts: 655
Joined: Wed Mar 17, 2010 1:32 pm
 
by LINDY Shippers » Fri Apr 11, 2014 2:43 pm
Hi,

I'm not aware of any way to make it run as a service, but the newer software has an option to allow a device to reconnect on startup.

Do you not get this option in the software?

Chris

 

piotr.nawrocki
New member
Posts: 3
Joined: Fri Apr 11, 2014 12:44 pm
by piotr.nawrocki » Fri Apr 11, 2014 3:56 pm
We have 2.0.7.1 version of software what is the newest one ?

 

LINDY John
LINDY Staff
Posts: 185
Joined: Mon Oct 03, 2011 9:46 am
by LINDY John » Mon Apr 14, 2014 10:23 am
This does appear to be the current version. I'll have a look for any updates

 

piotr.nawrocki
New member
Posts: 3
Joined: Fri Apr 11, 2014 12:44 pm
by piotr.nawrocki » Mon May 05, 2014 11:45 am
Any updates on this topic/problem ?

 

LINDY John
LINDY Staff
Posts: 185
Joined: Mon Oct 03, 2011 9:46 am
by LINDY John » Tue May 06, 2014 10:29 am
I'm afraid this function is not yet available in the Rally software
14 posts Page 1 of 1