Windows and Linux configuration

PS/2 - USB - LCD Consoles - Remote Management
6 posts Page 1 of 1
Anonymous
by Anonymous » Mon Sep 13, 2010 1:33 pm
Will the 2 Port KVM Switch Pro part number 32920 switch between a Windows pc and a Linux desktop?

 

LINDY Shippers
LINDY Staff
Posts: 655
Joined: Wed Mar 17, 2010 1:32 pm
 
by LINDY Shippers » Mon Sep 13, 2010 1:54 pm
Hello,

It should work fine.

Best Regards

 

david812
New member
Posts: 2
Joined: Wed Feb 26, 2014 2:29 pm
by david812 » Wed Feb 26, 2014 2:41 pm
Hello,
I've a similar problem.
I've a "KVM switch Pro USB 2.0 Audio DVI-I", and I'm trying to use it to switch between a Debian 6.0.0 and Win7.
The switch works fine when is set on the Win7 but It doesn't work fine under Debian.

I've read i should modify the xorg.conf.

Any other suggestions?

Cheers
Andrea

 

LINDY Shippers
LINDY Staff
Posts: 655
Joined: Wed Mar 17, 2010 1:32 pm
 
by LINDY Shippers » Wed Feb 26, 2014 3:20 pm
Hi,

Do you get any image at all under debian?

Normally you don't need to manually edit xorg.conf files anymore as these are automatically configured. However I don't use debian much.

Chris

 

david812
New member
Posts: 2
Joined: Wed Feb 26, 2014 2:29 pm
by david812 » Wed Feb 26, 2014 4:00 pm
Hello,
No i don't get any image at all.
Do you think under the newer Linux release it is automatically recognized? Debian 6.0.0 is quite old actually.

Andrea

 

LINDY Shippers
LINDY Staff
Posts: 655
Joined: Wed Mar 17, 2010 1:32 pm
 
by LINDY Shippers » Wed Feb 26, 2014 4:10 pm
It would be a good idea to check if possible.

Also it might be a good idea to check out another distribution like ubuntu, you can live boot so it doesn't effect the system.

Chris
6 posts Page 1 of 1