4x2 port hdmi splitter

Anything that doesn't fit in the below or just general help
2 posts Page 1 of 1
New member
Posts: 1
Joined: Sun Jan 26, 2014 1:37 pm
by ellis » Sun Jan 26, 2014 1:55 pm
I'm connecting two devices to two TVs through HDMI cables. The first TV is connected with a 3 meter cable and works fine for the most part. The second cable is approximately 17 meters. On this connection, the picture transfers fine, but I don't get any sound on that TV from my cable box, but my DVD player gets both picture and sound great over the same HDMI cable.

For both TVs, there is a second issue. Sometimes when a switch the input devices to another source, the connection goes blank. I have to cycle power on the output device to get the picture back.

What would the issue be?

The Lindy switch is model number 38043.


LINDY Shippers
Posts: 655
Joined: Wed Mar 17, 2010 1:32 pm
by LINDY Shippers » Mon Jan 27, 2014 10:38 am

When going long distance like 17m you always seem to get the audio dropping off first when you are at the edge of the limit.

I'd either recommend a shorter cable if possible or a HDMI inline booster.

It sounds like a bandwidth (over distance) problem

2 posts Page 1 of 1