Windows 8.1 Driver for "1 Port Parallel PCIe Card P/N 51185"?

Serial - Parallel - SATA - IDE - USB - FireWire - Network
4 posts Page 1 of 1
ReuelT
New member
Posts: 2
Joined: Tue May 13, 2014 5:31 am
by ReuelT » Tue May 13, 2014 5:46 am
I usually supply PCs with parallel port on motherboard for Plasma CNC machine.
I used the "1 Port Parallel PCIe Card P/N 51185" for a PC without parallel port running win 7 and it worked.
Then I supplied above card in a PC with Win 8,1, the card driver installed BUT plasmaCAM cannot detect any parallel port.

Is the an Win 8.1 driver for "1 Port Parallel PCIe Card P/N 51185"?
Last edited by ReuelT on Tue May 13, 2014 5:49 am, edited 1 time in total.

 

LINDY Shippers
LINDY Staff
Posts: 655
Joined: Wed Mar 17, 2010 1:32 pm
 
by LINDY Shippers » Tue May 13, 2014 9:29 am
Hi,

The Vista driver is the latest driver to be produced, we have tested this with 8.1 however.

Was this the same machine?

Chris

 

ReuelT
New member
Posts: 2
Joined: Tue May 13, 2014 5:31 am
by ReuelT » Tue May 13, 2014 10:50 am
Was this the same machine?
No!

The driver installed with no errors. Just doesn't work.

 

LINDY Shippers
LINDY Staff
Posts: 655
Joined: Wed Mar 17, 2010 1:32 pm
 
by LINDY Shippers » Tue May 13, 2014 4:40 pm
If this is another card (but same part) than the time you supplied the windows 7 machine, then it could be a faulty item.

If this was the same card just in another machine I'd suggest it might be an issue with the driver on windows 8.1, which we will need to look at.

Best Regards
Chris
4 posts Page 1 of 1