VGA Extender works on one screen but not another

VGA / HDMI over Cat5/6 - PS/2 / FireWire / USB Extenders
2 posts Page 1 of 1
stuartf
New member
Posts: 1
Joined: Wed Oct 26, 2011 4:57 pm
by stuartf » Thu Oct 27, 2011 2:04 pm
Hi All,

A little help would be grateful, have a VGA Extender (no: 37571) and planned to hook up to a 42" NEC display but when connected, nothing happens at all. Using a 17" all is fine, using a 15"....nothing. All are TFT and have used and tested the same PC and cables between all three screens. What am I missing?, thanks in advance.

 

LINDY Shippers
LINDY Staff
Posts: 655
Joined: Wed Mar 17, 2010 1:32 pm
 
by LINDY Shippers » Wed Nov 02, 2011 9:12 am
Hello,

You can get some strange problems with baluns. Since nothing can be configured on this (apart from the PC side resolution) then I'm afraid not much can be done.

I'd recommend returning this to us, and maybe upgrading to an active extender.

Best Regards
2 posts Page 1 of 1