Issue with HDMI Extender 35m

VGA / HDMI over Cat5/6 - PS/2 / FireWire / USB Extenders
2 posts Page 1 of 1
lemonnierf
New member
Posts: 1
Joined: Sat Oct 13, 2012 2:49 pm
by lemonnierf » Sat Oct 13, 2012 3:00 pm
Hi,

I bought a couple of months ago a HDMI Extender 35m and installed it at home.
It has worked sometime quite well but for an unknown reason has stopped working (I changed nothing on my installation).
Both leds on devices are on and I have tried to copy the EDID again and again without success

Any advices ?

Thanks and Regards

 

LINDY Shippers
LINDY Staff
Posts: 655
Joined: Wed Mar 17, 2010 1:32 pm
 
by LINDY Shippers » Mon Oct 15, 2012 9:09 am
If you have not changed anything in your setup and have tried a power cycle I'd recommend a return to check the units work. These might of developed a fault.

Chris
2 posts Page 1 of 1