HDMI & IR Cat6 Extender 38144

VGA / HDMI over Cat5/6 - PS/2 / FireWire / USB Extenders
2 posts Page 1 of 1
New member
Posts: 1
Joined: Sun Feb 19, 2017 3:25 am
by rockets » Sun Feb 19, 2017 3:40 am

I purchased this Splitter extender kit. It was working when I first purchased it. Now it's not working. Nothing in my setup has changed. I disconnected the receiver from the transmitter & when I reconnect it I get a few seconds of audio but not a picture when I have the EQ setting for under 15M in the primary setting. The Receiver unit doesn't have the lock LED lit. I've changed to all of the EQ settings but only the one gives a brief bit of audio. I've also tested with EID set to the remote or local. The IR works however.

Have I got a faulty unit?

My setup:

Transmitter source Foxtel IQ2 (Pace) Satellite STB. Also connected to Denon AVR 3312.
Reciever connected to Yamaha RX-A3060.
Cable length approx 30M.

Posts: 195
Joined: Mon Oct 03, 2011 9:46 am
by LINDY John » Mon Feb 20, 2017 9:09 am

There seems no obvious reason for this problem. I would suggest returning the unit for testing.

If purchased directly from Lindy you can begin the process here

2 posts Page 1 of 1