4x2 HDMI 4K Matrix Switch

VGA - HDMI - Wall Plates - Speakers - Switches - Splitters
2 posts Page 1 of 1
mikepeter
New member
Posts: 1
Joined: Fri Feb 14, 2014 7:14 pm
by mikepeter » Sat Feb 15, 2014 10:03 am
Hi There

I bought a brand new 4x2 Hdmi matrix switch to solve a problem in my setup.

I have an oppo 103d witch is my main source for blueray, an sony vpl HW55 es projector and a Yamaha z7 receiver.

The inciial ideia is conecting the oppo to the switch and send the 3D image to the projector and the DTS HD to the receiver via the two way output of the lyndy. The problem is that it dosnt work. If the receiver is disconnect the image passes in 3d to the projector, but if the receiver is connected the image becames 2D and the sound passes in DTS HD to the receiver.

I tried forcing the 3D via Lindy switch and nothing happend, with the Yamaha and Sony on the problem remain.

I tried forcing the 3D in the oppo and the switch send the 3D image, but in the process the sound stop working.

The switch can't process the audio signal and the image at the same time??

 

LINDY Shippers
LINDY Staff
Posts: 655
Joined: Wed Mar 17, 2010 1:32 pm
 
by LINDY Shippers » Mon Feb 17, 2014 9:09 am
Hi Mikepeter,

Could you confirm that the Yamaha Z7 supports 3D? As looking online it doesn't seem to do this.

If the amp doesn't support 3D then you cannot split the signal to 2D and 3D, it is an EDID limitation.

Chris
2 posts Page 1 of 1