38048 / PIP function

VGA - HDMI - Wall Plates - Speakers - Switches - Splitters
4 posts Page 1 of 1
dcasher
New member
Posts: 3
Joined: Wed Jul 29, 2015 6:30 pm
by dcasher » Wed Jul 29, 2015 6:34 pm
Hello,

38048 has a PIP function.

Site says > Supports PiP (Picture in Picture), 1 main picture, 5 sub pictures

When PIP is activated, does it show 1 main pic + 5 sub pics ? Can you send any image as example ?

Is it possible to have 1 main pic + only 1 sub pic in the pip window ?

Await your prompt reply

dca
LINDY Guy
LINDY Staff
Posts: 87
Joined: Thu Oct 30, 2014 1:10 pm
by LINDY Guy » Thu Jul 30, 2015 9:16 am
Hi Dcasher,

When you press the PiP button on the remote control it will switch both outputs A and B to the same input channel, and show you the remaining 5 inputs in sub-pictures on the screen. You can then choose which input you would like to view and once you select a sub-picture, both output channels will switch to that on the full screen.

When using the PiP function, all available inputs will show in sub-pictures. You cannot set it to just show 1 I'm afraid.

Guy
dcasher
New member
Posts: 3
Joined: Wed Jul 29, 2015 6:30 pm
by dcasher » Thu Jul 30, 2015 9:28 am
Hello,

Is it not possible for >

Output A to show Input 1 while Output B shows Input 2 and the pip screen then shou the remaining 5 inputs in either ?

From your reply it seems that when PIP is pressen on the remote, BOTH outputs show the SAME input and the 5 sub pics.

dca
LINDY Guy
LINDY Staff
Posts: 87
Joined: Thu Oct 30, 2014 1:10 pm
by LINDY Guy » Thu Jul 30, 2015 10:00 am
Hi Dcasher,

When pressing the PiP button, the image on OUTPUT B will mirror the image on OUTPUT A. Once you have found the PiP source you want to watch, press enter to show this on the full screen for both OUTPUT A and B

Please find the manual below for more information:

http://www.lindy.co.uk/downloads/142970810838048V3.pdf

Guy
4 posts Page 1 of 1