2 Port HDMI 2.0 18G Splitter No. 38240

VGA - HDMI - Wall Plates - Speakers - Switches - Splitters
5 posts Page 1 of 1
davide
New member
Posts: 3
Joined: Fri Apr 13, 2018 1:59 pm
by davide » Fri Apr 13, 2018 2:20 pm
Hello

I would like to send a signal from my Panasonic 4k Blu Ray player to my Marantz 4k receiver .

Then from the output of the receiver to the Lindy 2 Port HDMI 2.0 18G Splitter No. 38240 - input.
Then outputs 1 and 2 to LG OLED 4K HDR TV and A Sony 4k HDR projector.

Would this work?

With thanks
David
LINDY Adam
LINDY Staff
Posts: 16
Joined: Thu May 18, 2017 2:30 pm
by LINDY Adam » Fri Apr 13, 2018 2:41 pm
Hi David,

In theory this should work fine.

Regards Adam
davide
New member
Posts: 3
Joined: Fri Apr 13, 2018 1:59 pm
by davide » Fri Apr 13, 2018 3:51 pm
Thanks
Adam
davide
New member
Posts: 3
Joined: Fri Apr 13, 2018 1:59 pm
by davide » Sat May 12, 2018 1:35 pm
Hi Adam

I ordered the lindy 4k splitter, all works HDR into my tv and projector, though the picture goes off when the projection screen lowers.
The main problem is I can not get working through the splitter box is arc. It works straight from the receiver to the tv, but not via the splitter box. To confirm I have brand new high spec hdmi cables. Any thoughts?

David
LINDY Adam
LINDY Staff
Posts: 16
Joined: Thu May 18, 2017 2:30 pm
by LINDY Adam » Mon May 14, 2018 9:06 am
Hi David,

Unfortunately our splitters don't support ARC. Can you clarify what you mean by the screen goes off when it lowers?

Regards Adam
5 posts Page 1 of 1