I have a WPS projector server model 32700, I have been trying to connect it to projector as per instruction manual, however upon inserting the power to the WPS the power light flashes Red and does nothing more. I have tried Hard Reset but to no avail, any ideas any one. Note it is original power supply 5V 2.6a
Howard
WPS Projector Server model 32700
5 posts
Page 1 of 1
Hi Howard,
Is the WPS server new or has it just stopped working?
To reset please unplug the power and using something small like a paperclip, press and hold the reset button. While keeping the button pressed, connect the power and wait for 10 seconds.
Guy
Is the WPS server new or has it just stopped working?
To reset please unplug the power and using something small like a paperclip, press and hold the reset button. While keeping the button pressed, connect the power and wait for 10 seconds.
Guy
Hello Guy
Thanks for the reply
I have tried the Reset as per your description several times.
I WPS Server is not new, I have had it about 2 years although I have only used it once and it worked.
when trying to set it up yesterday I did get it to talk to the projector once, but then lost connection before the screen came up with the login details.
I have tried 3 or 4 different VGA cable and 2 different projectors
When plugging in the power it will occasionally flash Green before going to flashing RED
Howard
Thanks for the reply
I have tried the Reset as per your description several times.
I WPS Server is not new, I have had it about 2 years although I have only used it once and it worked.
when trying to set it up yesterday I did get it to talk to the projector once, but then lost connection before the screen came up with the login details.
I have tried 3 or 4 different VGA cable and 2 different projectors
When plugging in the power it will occasionally flash Green before going to flashing RED
Howard
5 posts
Page 1 of 1