51275 8 port board

Serial - Parallel - SATA - IDE - USB - FireWire - Network
10 posts Page 1 of 1
TekLord
New member
Posts: 5
Joined: Wed Apr 05, 2017 5:38 pm
by TekLord » Wed Apr 05, 2017 5:40 pm
I need a pin out or schematic of the board to make a cable that works with my existing system
LINDY Guy
LINDY Staff
Posts: 82
Joined: Thu Oct 30, 2014 1:10 pm
by LINDY Guy » Thu Apr 06, 2017 9:29 am
Hi TekLord,

Is it just the pinout for the 62-pin cable that you require?

Guy
TekLord
New member
Posts: 5
Joined: Wed Apr 05, 2017 5:38 pm
by TekLord » Thu Apr 06, 2017 4:47 pm
I need to know the functions of each pin on the card so I can make a cable to go to existing hardware
LINDY Guy
LINDY Staff
Posts: 82
Joined: Thu Oct 30, 2014 1:10 pm
by LINDY Guy » Fri Apr 07, 2017 9:03 am
Unfortunately we don't currently have that information available, however I have requested it from our factory and will let you know when I have an answer.

Guy
TekLord
New member
Posts: 5
Joined: Wed Apr 05, 2017 5:38 pm
by TekLord » Tue Apr 11, 2017 6:02 pm
so nothing?
LINDY John
LINDY Staff
Posts: 185
Joined: Mon Oct 03, 2011 9:46 am
by LINDY John » Wed Apr 12, 2017 8:54 am
Not at this time I'm afraid. We will re ask the question.
TekLord
New member
Posts: 5
Joined: Wed Apr 05, 2017 5:38 pm
by TekLord » Thu Apr 13, 2017 8:41 pm
I figured it out
you want the pin out?
LINDY Guy
LINDY Staff
Posts: 82
Joined: Thu Oct 30, 2014 1:10 pm
by LINDY Guy » Tue Apr 18, 2017 9:16 am
Hi TekLord,

Glad to hear you have figured the pinout attached. We have just had a reply from our factory, pinout is attached below.
51275 Pinout.PNG
51275 Pinout.PNG (173.43 KiB) Viewed 230 times
Guy
TekLord
New member
Posts: 5
Joined: Wed Apr 05, 2017 5:38 pm
by TekLord » Thu Jun 15, 2017 9:30 pm
was bored check back
we have already made tested and shipped 12 units
thanks
LINDY Guy
LINDY Staff
Posts: 82
Joined: Thu Oct 30, 2014 1:10 pm
by LINDY Guy » Fri Jun 16, 2017 9:11 am
Thanks for the feedback, good to hear!

Guy
10 posts Page 1 of 1