LINDY Technical Support Forum

Anonymous · by **Anonymous** » Mon Sep 13, 2010 1:33 pm Reply with quote

Will the 2 Port KVM Switch Pro part number 32920 switch between a Windows pc and a Linux desktop?

by **LINDY Shippers** » Mon Sep 13, 2010 1:54 pm Reply with quote

Hello,

It should work fine.

Best Regards

david812 · by **david812** » Wed Feb 26, 2014 2:41 pm Reply with quote

Hello,
I've a similar problem.
I've a "KVM switch Pro USB 2.0 Audio DVI-I", and I'm trying to use it to switch between a Debian 6.0.0 and Win7.
The switch works fine when is set on the Win7 but It doesn't work fine under Debian.

I've read i should modify the xorg.conf.

Any other suggestions?

Cheers
Andrea

by **LINDY Shippers** » Wed Feb 26, 2014 3:20 pm Reply with quote

Hi,

Do you get any image at all under debian?

Normally you don't need to manually edit xorg.conf files anymore as these are automatically configured. However I don't use debian much.

Chris

david812 · by **david812** » Wed Feb 26, 2014 4:00 pm Reply with quote

Hello,
No i don't get any image at all.
Do you think under the newer Linux release it is automatically recognized? Debian 6.0.0 is quite old actually.

Andrea

by **LINDY Shippers** » Wed Feb 26, 2014 4:10 pm Reply with quote

It would be a good idea to check if possible.

Also it might be a good idea to check out another distribution like ubuntu, you can live boot so it doesn't effect the system.

Chris

LINDY Technical Support Forum

Windows and Linux configuration

Windows and Linux configuration